Metal wire drawing machine is an important equipment for the production of metal wire rods. It is a pre-processing equipment for the production of standard parts and other metal products. It is mainly used in machinery manufacturing, hardware processing, petrochemical and other industries. The purpose of using a metal wire drawing machine is to better draw the wire or bar through the wire drawing machine, so that the diameter, roundness, internal metallographic structure, surface finish and straightness of the wire or bar are up to standard. Raw material handling requirements for the production of metal products such as parts.
Therefore, the pretreatment quality of the wire or bar by the wire drawing machine is directly related to the product quality of the standard parts and other metal products manufacturers; Production and preprocessing of metal products such as prestressed steel wires and standard parts.
In the metallurgical industry, the wire drawing machine is an important equipment for the production of metal wires. Its main function is to draw various wires into filaments of various specifications. From the working form and mechanical structure, it is divided into straight type, looper type, water tank type (etc. For products with different precision and different specifications, different metal types, different specifications of wire drawing machines can be selected.
For wire and cable production enterprises with copper and aluminum base materials, the fine drawing machine controlled by double frequency conversion is widely used, while for most steel wire production enterprises, according to the characteristics of steel, more straight-forward wire drawing machines are used. Among them, the double frequency conversion wire drawing machine is widely used and representative.
In the drawing process of the wire drawing machine, it is hoped that each link of the busbar should be wrapped with anti-rust paper before it is put into production, and even ordinary paper can be recycled; in the production process, the spraying amount of drawing oil is insufficient, especially many companies do not The pipeline water pump is regularly managed, which is prone to blockage;
The wire drawing die is not regularly managed, and the copper powder at the entrance of the wire drawing die is heavily accumulated, causing the wire drawing oil to not play a role in cooling and lubrication; the pH value of the wire drawing oil fluctuates, it is recommended to control it at about 9; employees are required not to touch the copper wire with their bare hands; production must be done at the specified speed Yes, overspeed production is strictly prohibited for wire drawing machines.
