Straight-forward wire drawing machine is a kind of wire drawing equipment with high working efficiency, good wire drawing quality, strong cooling and very high cost performance. It is quite widely used in practical applications. In comparison, the straight wire drawing machine has great advantages in terms of production efficiency, production cost, and product quality.
The straight-forward wire drawing machine can be divided into three parts, namely, pay-off, drawing and take-up. The pay-off part is composed of two duckbill-type large-scale replay lines, each with a bulk density of 2.5 tons. When in use, the thread tail of the blank in use is connected with the thread head of another spare blank. When the blank in use is used up, it will automatically transfer to another tray to realize non-stop pay-off.
In the straight-forward wire drawing unit, a large reel pay-off device is also configured to meet different pay-off requirements. The drawing part is composed of 9 dry drawing units. In order to facilitate the time for changing the plate when the heavy-duty wheel is paid out, it is not necessary to stop the machine to change the wheel. One drawing unit is designed as a pulley type, and the rest are Straight forward.
In addition, the die of this straight wire drawing machine adopts forced water cooling, which can take away the heat in a short time, and the hardness of the die during high-speed drawing. Effective cooling is one of the prerequisites for high-speed drawing.
As for the wire take-up part of the straight-forward wire drawing machine, it can also meet the requirements of re-reeling of the I-shaped wheel, re-reeling of the wire rack, and bundling of ordinary small plates. In actual work, this straight-forward wire drawing machine can also be switched at any time according to different wire take-up requirements, which improves work efficiency.
The straight-forward wire drawing machine effectively controls the second flow of metal in each reel. During the drawing process of the steel wire, first the steel wire will be wound from a reel to a certain number of turns, and then directly enter through the tuning roll. to the next drawing die.
