The components of the automatic wire drawing machine include conveying system, abrasive belt system, pressing wheel feeding mechanism, lifting system, abrasive belt rectifying system, braking device, air source system, cooling system, power supply system and safety protection system.
The whole structure of the automatic wire drawing machine: it is formed by bending 12 cm steel plate, the structure is firm, it is not easy to deform, and the operation is stable.
Conveying system: It is composed of conveying deceleration motor, conveying belt and conveying wheel. The tension of conveying belt is adjustable, the operation is simple, and the frequency converter for conveying and installation can stepless speed regulation.
Abrasive belt system: both the driving wheel and the passive wheel are corrected by static and dynamic balance. The surface of the rubber wheel is designed with cooling grooves to facilitate heat dissipation.
Feeding mechanism of pressure roller: The pressure roller is installed on both sides of the main rubber roller and adopts a spring force structure to provide smooth feeding.
Lifting system: It adopts a four-column lifting mechanism, with electric and manual operation modes.
Abrasive belt deviation correction system: The advanced imported photoelectric control system can accurately control the running track of the abrasive belt and prevent the belt from deviating.
Braking device: When the sand belt is opened and sanded, the belt runs off or breaks and other obstacles cause the belt to break. If the safety travel switches on both sides of the belt are touched by the belt, it will immediately transmit the power off of the host and make an emergency brake to protect the belt. and the role of the machine.
Air source system: The source system consists of an external air source, two-pieces, pipes, and cylinders, and the air source pressure is 0.55Mpa
Cooling system: It is equipped with a water basin, a water tank and a water pump device, which can be cooled by adding water and oil mills.
Power supply system: AC power supply with a power supply voltage of 380V and a frequency of 50HZ
Safety protection system: equipped with overload, overcurrent, limit, belt deviation, gas cutoff, emergency stop and other protection devices.
