The electrical equipment of the wire drawing unit must be well grounded, and the two limit screws of the stroke bumper must be complete; during operation, it is forbidden to touch the handwheels, handles and electrical buttons at will to avoid accidents; it is forbidden to touch each movement with hands Parts; tools and other objects are not allowed on the workbench.
The safety devices such as grinding wheel guards and belt guards installed on the wire drawing machine must be intact and must not be removed at will. All fixing screws of the guards should only be tightened; when starting the grinding wheel, no one should stand in front of the grinding wheel to avoid accidents. When repairing or checking the wire drawing machine, the power supply of the sling round wire drawing unit must be cut off.
When feeding the grinding wheel or the wire drawing knife of the wire drawing machine, it should be smooth and slow to ensure safety. The bed surface, the guide rail of the straightening machine, etc. should be refueled frequently; before starting the wire drawing machine, the grinding wheel or the wire drawing knife should be separated from the grinding roller for a certain distance, and the electrical appliances should be in the stop position. Adjust properly and tighten; after drawing, first withdraw the tool, then stop, remove the roller of the drawing machine and place it on the skid, and apply anti-rust oil if it is not used temporarily.
With the continuous development of frequency conversion speed regulation technology, frequency conversion speed regulators have been widely used in the wire drawing machine industry. The level of automation and processing capacity, effectively reducing the unit energy consumption and maintenance costs of the equipment, has been widely recognized by the industry.
